Fill and Base Material Delivered in Selmer, TN

Tennessee Rock Supply handles gravel and aggregate delivery in Selmer, TN, and around McNairy County. Water drives the orders here. Flat creek bottoms stay wet for days after heavy rain, and upland silt soils hold a dense layer that will not let water soak away. Crusher run is the answer most jobs start with, since the fines in it lock together into a hard, stable surface that sheds runoff instead of trapping it.

Materials for Selmer Projects

Most work around here starts below grade. You raise the pad, build the sub-base, then surface it. Get the fill and base right and everything above it lasts.

Start with Fill Dirt to raise grade or build up a pad before any base course goes down. On soft, wet ground, bring the grade up first, then compact in lifts. Cap it with Crusher Run, the standard Tennessee driveway stone, crushed rock with the fines left in so it packs hard. Where a road or heavy lot is specified, the graded base product is Crusher Run (Mineral Aggregate Base).

Water still has to leave. Set #57 Stone in French drains, downspout runs and behind retaining walls. Use Screenings to bed pavers and flagstone and to level under a patio, and Top Soil to finish lawn and bed areas over tight clay.

Ground and Conditions in Selmer

Selmer sits on silty wind-blown loess over Coastal Plain sand, clay and gravel. That top layer drains slowly, and the dense subsoil under it slows water even more. An under-built base here pumps, shifts and ruts the first wet spring.

So build deeper than you think you need. Compact fill dirt in lifts, then bring the crusher run up in lifts and compact each one. Cut a drainage layer of #57 stone along the low edge and at every downspout, and water has somewhere to go.

Bare slopes are the other problem. Loess and loose sand wash fast, cutting gullies and silting ditches. Arm creek banks, ditch lines and culvert outlets with RipRap before the winter rain arrives. Frost stays shallow here, well above the footing depth the local building department sets, so winter work is rarely stopped by frozen ground. Wet soil and flooded bottoms are what delay grading and base work, and both peak from winter into spring. Schedule earthwork around that window, not through it.

Delivery to Selmer and the Surrounding Area

Order online and pick your material and quantity. Bulk stone, sand and soil move by the ton, so the number you enter is the number you get. Measure your pad or drive, work out the square footage, and set the depth you want. A modest layer is a good starting point for a topping, and base courses run deeper.

Delivery covers Selmer and the rest of McNairy County, including Adamsville, Bethel Springs, Michie, Stantonville and Ramer. Have the site clear and the truck able to reach the drop point. Bulk loads go where the truck can safely turn around and dump.

Questions from Selmer Buyers

What is the best base under pavers in Selmer?

Compact a crusher run base first, then bed the pavers in screenings. The crusher run carries the load and sheds water, and the screenings give you a fine, level bed with no large stone poking through. Keep the base at a consistent depth and compact it in lifts before you set anything on top.

Do you supply contractors working in Selmer?

Yes. Builders, excavators and landscapers working in Selmer and across McNairy County order fill dirt, crusher run, washed stone, sand and soil here in bulk. Order online by the ton and send the load straight to the site. The same materials and quantities are available for homeowners running their own projects.

Order Fill and Base Stone for Your Selmer Job

Crusher run is where most Selmer jobs start, and it is the stone that holds up on wet ground and heavy pads. Pair it with fill dirt to raise grade, then add washed stone where water needs to move. Order bulk gravel and aggregate delivery in Selmer, TN from Tennessee Rock Supply and get your base in before the next rain.