Skip to main content
FREE Delivery!|(615) 908-6867

Cocke County, Tennessee ยท Free Delivery

Bulk Gravel Delivery to Parrottsville, TN

Free delivery to Parrottsville on every order, with loads arriving in as fast as 2 business days.

Delivering to Parrottsville, TN

Free delivery on every order.

  • Free delivery to Parrottsville
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Parrottsville

Crushed gravel and base materials that compact under tires.

Rock & Stone delivered to Parrottsville

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Parrottsville

Decorative delivered to Parrottsville

Rounded stone for beds, borders and water features.

Sand delivered to Parrottsville

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Parrottsville

Soil and fill by the ton, mulch by the cubic yard.

Fill Dirt

Compactable dirt for grading, backfill and low spots

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Parrottsville

How delivery to Parrottsville works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Parrottsville.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Parrottsville addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Order gravel and aggregate delivery in Parrottsville, TN online, by the ton or by the yard. Tennessee Rock Supply delivers crusher run, stone, sand, topsoil and mulch across Cocke County. Build your order, pick a quantity, and we haul it to your site. Parrottsville sits on cherty clay over limestone, so the material under your project matters as much as the material on top.

Materials for Parrottsville Projects

Start with bedding. A patio, walkway or paver pad in Parrottsville depends on what sits under the stone. Get the base right and the surface stays flat for years.

Screenings, also called #10 screenings or stone dust, are the standard bedding for pavers and flagstone. They compact smooth and hold a level plane. For a thicker structural layer, use crusher run, the crushed stone with fines left in. It locks together and carries the load.

Sand handles the flatwork side. Mason sand beds brick, block and paver joints. Washed sand, also called concrete sand, levels and beds under slabs. Washed Sand blends coarse sand and fine gravel for leveling and bedding.

Finish the edges and drainage with washed stone. #57 stone drains and tops drives. #67 stone does the same at a slightly smaller size. Drain rock handles French drains and downspout runs.

Ground and Conditions in Parrottsville

Most patio failures here start with a base that is too thin. Parrottsville ground runs to cherty clay, often red, over limestone and dolomite. Clay moves when it gets wet. Lay pavers on an inch of sand over that clay and the edges sink, the joints open, and the surface rocks.

The fix is depth and compaction. Excavate, then build a compacted crusher run base in lifts. Bed the pavers on screenings. Where heavier loads cross the pad, mineral aggregate base, also specified as Grading D, gives a graded base stone that holds up better.

Water decides the rest. Sinkholes and springs in the limestone valleys pull runoff underground, while slower clay and shale ground pushes storm water across the surface toward creeks. Storm runoff off the ridge slopes scours creek banks and cuts into bare clay on cleared hillsides.

Plan around the wet season. Late winter and spring are the wettest stretch, and flash flooding peaks from late spring into summer. Saturated clay and high creeks delay base work far more often than frozen ground does. Frost stays shallow on the valley floors, and the ridges run colder with more snow.

Delivery to Parrottsville and the Surrounding Area

Order online and choose your unit first. Sold by the ton, material is weighed. Sold by the yard, it is measured by volume. Most bulk orders here go by the ton.

Estimate quantity before you order. Measure the length and width, then multiply by the depth you need in feet. Divide by 27 for cubic yards. For a compacted crusher run base, add extra, because it compacts down once it is rolled.

Bulk delivery drops on your site, not on a pallet. Pick a spot the truck can reach and dump without blocking the road. We deliver across Parrottsville and the rest of Cocke County, including Newport, Cosby, Bybee, Del Rio and Hartford.

Questions About Gravel and Stone in Parrottsville

What gravel is best for a driveway in Parrottsville?

Crusher run is the standard choice. It has the fines left in, so it compacts into a hard, stable surface that suits the cherty clay and limestone ground around Parrottsville. Use it for the base, then top with driveway gravel or #57 stone for a cleaner running surface.

How much material will my project need?

Measure the area and decide your depth. Multiply length by width by depth in feet, then divide by 27 to get cubic yards. Converter tools turn that figure into tons using the material's weight per yard. Add extra for compaction on base layers, and round up rather than short.

Size Your Order and Get It Delivered

Use the calculator to turn your measurements into tons or yards, then build the order around it. Get the base depth right and the bedding correct, and your patio, walk or drive will hold for the long run. Order crusher run, screenings, sand and stone online for delivery in Parrottsville, TN.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Parrottsville, TN

What gravel is best for a driveway in Parrottsville?

Crusher run is the standard choice. It has the fines left in, so it compacts into a hard, stable surface that suits the cherty clay and limestone ground around Parrottsville. Use it for the base, then top with driveway gravel or #57 stone for a cleaner running surface.

How much material will my project need?

Measure the area and decide your depth. Multiply length by width by depth in feet, then divide by 27 to get cubic yards. Converter tools turn that figure into tons using the material's weight per yard. Add extra for compaction on base layers, and round up rather than short.

What happens if the weather turns?

We would rather move a delivery than tear up your ground. If the site is too wet for the truck on the day, we will call you and rebook. Tell us in advance about any part of the approach that does not drain and we will plan around it.