Skip to main content
FREE Delivery!|(615) 908-6867

Mcnairy County, Tennessee ยท Free Delivery

Pea Gravel for Pathways in Milledgeville, TN

Free delivery to Milledgeville on every order, with loads arriving in as fast as 2 business days.

Delivering to Milledgeville, TN

Free delivery on every order.

  • Free delivery to Milledgeville
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Milledgeville

Crushed gravel and base materials that compact under tires.

Rock & Stone delivered to Milledgeville

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Milledgeville

Decorative delivered to Milledgeville

Rounded stone for beds, borders and water features.

Sand delivered to Milledgeville

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Milledgeville

Soil and fill by the ton, mulch by the cubic yard.

Fill Dirt

Compactable dirt for grading, backfill and low spots

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Milledgeville

How delivery to Milledgeville works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Milledgeville.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Milledgeville addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

If you are planning a walkway, a patio base or a drainage run, gravel and aggregate delivery in Milledgeville, TN starts with picking the right stone. Tennessee Rock Supply hauls bulk loads across McNairy County. Most jobs here start with crusher run for the base, then a finer material on top. In this part of West Tennessee, silty loess and clay subsoil hold water, so what you put under a path matters as much as what shows.

Materials for Milledgeville Projects

A firm Milledgeville path depends on the fines. That is the fine crushed material that locks together and gives you a firm, walkable surface instead of loose stone that rolls underfoot. Around Milledgeville, most path builds start with crusher run as the compacted base course, then finish with a finer layer.

Start with crusher run, the standard Tennessee driveway and base stone. It has the fines left in, so it compacts into a hard, stable surface. For a path, a solid compacted crusher run base will carry foot traffic and a wheelbarrow without rutting. If the path also takes a truck or trailer, go deeper and wider than the walking surface.

Finish the path with walkway gravel, which is sized for a finer, walkable surface. For bedding under pavers or flagstone, use screenings, also called #10 screenings or stone dust. Screenings bed a paver course and lock into the joints once you wet and compact them.

Two more that show up on almost every path job:

  • driveway gravel for topping an existing compacted base, and for the stretch where a path meets the drive.
  • #89 crushed stone, a small washed stone that works for tight bedding and paver joints where you want drainage instead of a locked surface.

Ground and Conditions in Milledgeville

Milledgeville paths usually go wrong when the base underneath is too thin. The path looks fine for a season, then ruts form, the edges push out and stone migrates into the yard. That happens because the subgrade never got drained or compacted, and the fines in the surface layer had nowhere to lock.

The ground is the reason. This zone is silty wind-blown loess over Coastal Plain sand, clay and gravel, and many upland silt soils have a dense subsoil layer that slows water soaking in. Wide, flat creek and river bottoms flood and stay wet after heavy rain. Build a path across ground like that and water sits under your base until it pumps.

A lasting repair needs both a thicker base and a way for water to leave. Excavate enough to get a compacted crusher run base, crown the path so it sheds, and add a washed stone drainage layer where the ground stays soft. Bare slopes also wash out fast here, so seed or stone the edges before the next storm cuts a gully.

Winter and spring bring the most rain. Wet silt and flooded bottoms delay grading and base work more often than frozen ground does, so schedule that work for a dry stretch. Frost stays shallow and the cold is milder than on the Cumberland Plateau and in the mountains.

Delivery to Milledgeville and the Surrounding Area

Order online and choose your quantity by the ton or by the cubic yard. Yards are easier when you know the volume you need to fill: length times width times depth. Tons are easier when you already know the weight your truck can take.

To estimate, measure the path, decide the compacted depth, then add extra for compaction and spill. Crusher run and screenings both settle once they are compacted and watered, so a little over is normal. If the math gets awkward, the site calculator will convert between tons and yards for you.

Bulk delivery drops on a site in Milledgeville and the rest of McNairy County, including Selmer, Adamsville, Bethel Springs, Michie and Stantonville. Have the drop spot clear and reachable so the driver can place the load where you want it.

Get Your Path Materials

Run your numbers through the calculator first, then order the crusher run, screenings and walkway gravel your path needs. Tennessee Rock Supply delivers bulk loads across Milledgeville and McNairy County, so you can get the base and the finish on site together. Place your order online when your quantities are set.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Milledgeville, TN

What should I have ready when the truck arrives?

Clear the drop area and make sure the driveway or lane can take a loaded truck. Mark any sprinkler lines, shallow pipes or septic parts you do not want crushed. Tell the driver where you want the pile, and keep vehicles out of the way. A spot on firm, level ground lets the load slide out clean instead of burying your base.

What is the best base under pavers in Milledgeville?

Crusher run is the base, compacted in lifts to a solid layer, then screenings bed the pavers on top. The crusher run carries the load and drains; the screenings let you level each paver and lock the joints. Local silt holds water, so crown the finished surface and drain the edges.

What happens if the weather turns?

We would rather move a delivery than tear up your ground. If the site is too wet for the truck on the day, we will call you and rebook. Tell us in advance about any part of the approach that does not drain and we will plan around it.