Crushed Stone, Sand and Gravel in Drummonds, TN

Tennessee Rock Supply handles gravel and aggregate delivery in Drummonds, TN for two kinds of buyers: crews building driveways and pads, and homeowners fixing a washed-out lane. Crusher run is the material both groups ask for first. It is crushed stone with the fines left in, so it compacts into a hard surface that stays put.

This is West Tennessee, where silty loess sits over Coastal Plain sand and clay. That ground decides how much base your project really needs.

Materials for Drummonds Projects

Driveways and base work lead everything here. Crusher run is the standard Tennessee driveway and base stone, and it is the right first layer for a lane, a parking pad, or a barn pad. Spread it, wet it, and compact it before you think about a top course.

Where a driveway carries heavier loads or the grade needs to hold under a truck, mineral aggregate base is the tighter, more closely graded option. It links to our Crusher Run (Mineral Aggregate Base) page.

For drainage, #57 stone is the workhorse: French drains, downspout runs, and a free-draining layer behind a retaining wall. If you need a smaller washed size for tight joints or concrete work, #67 stone and #8 crushed stone do that job.

Sand and soil round out a driveway job. Mason sand beds brick and block and fills paver joints. Screened topsoil rebuilds a lawn over heavy clay, and fill dirt raises grade before any base stone goes down.

Ground and Conditions in Drummonds

Start with where the water goes. This part of Tipton County gets its heaviest rain in winter and spring, and the flat creek and river bottoms flood and stay wet long after the storm passes. On the uplands, a dense subsoil layer slows water soaking in.

That combination is why so many local driveways rut and pothole. Water sits on top instead of draining away, and a thin base layer gives out under it. A thicker compacted crusher run base, crowned so it sheds water, lasts far longer than a light top dressing.

Bare slopes are the other problem. Loess and loose Coastal Plain sand wash out quickly, cutting gullies and silting up ditches. Rip rap armors a culvert outlet or creek bank, and drain rock handles the water you need to move underground. Because rain dominates the wet season, grading and base work get delayed by soaked silt more often than by frozen ground.

Frost stays shallow here, and winters bring regular freeze-thaw cycles. Tennessee's residential code puts footings at least 12 inches below grade, and the local building department sets the frost line. For a driveway, that means the base needs to sit on firm, drained ground, not on soft fill.

Delivery to Drummonds and the Surrounding Area

Order online and pick your material by the ton or the cubic yard. Bulk loads arrive by dump truck and are tipped where you point, so have the drop spot clear and reachable before the truck shows up. Note any overhead wires, low limbs, or soft ground on the order.

For a driveway, measure length, width, and planned depth to size the load. A compacted crusher run base is a common start for a residential lane, and you can add a surfacing layer on top once it is compacted.

We deliver throughout Tipton County, including Atoka, Covington, Munford, Brighton, and Mason. Whether the site is a new build or a repair, put the material where the work is and keep the truck path open.

Order Stone and Gravel for Your Drummonds Project

From a new driveway and parking pad to drainage, sand bedding, and topsoil, we supply the materials Drummonds projects run on. Crusher run leads the list, with washed stone, sand, and soil to finish the job. Size your load, place your order online, and we will deliver it to your site in Tipton County.