Bulk Material Delivery in Burns, TN

Tennessee Rock Supply handles gravel and aggregate delivery in Burns, TN, by the ton. Most jobs here start with crusher run, the crushed stone with the fines left in that compacts into a hard, stable surface for driveways, parking pads and barn pads.

Just as many start with washed stone, because Burns sits on cherty clay over limestone and chert bedrock, and water has to go somewhere. We stock the sizes that move it.

Materials for Burns Projects

Drainage drives most of the orders we send to Burns. Clay holds water, so a driveway, a barn pad or a low spot in the yard needs stone that lets water pass instead of stone that traps it. Order by size, coarsest to finest.

Coarse drainage stone

Use #4 crushed stone for heavy drainage, construction entrances and trench bottoms. It is the open, chunky stone that keeps a trench working when the ground around it stays wet.

RipRap armors creek banks, ditch lines and culvert outlets. On steep ground, it is what stops storm runoff from cutting the bank out from under you.

Washed stone for French drains and drywells

#57 Stone is the standard for French drains, downspout runs and driveway topping. It is washed, so it drains freely and does not pack into a solid mass.

#67 Stone does the same work at a slightly smaller washed size, which suits tighter trenches and concrete work. Drain Rock is sized for French drains, downspout runs and the drainage behind a retaining wall.

Fine stone, sand and base

Screenings bed pavers and flagstone and level under patios and paths. Mason Sand sets brick and block and fills paver joints. For a drive or a pad, start with Crusher Run, then top it with Driveway Gravel once it has compacted.

Ground and Conditions in Burns

Winter and spring are the wettest seasons here, and saturated clay delays base work more often than frozen ground does. That timing decides your schedule more than the calendar does.

Cherty clay over limestone and chert bedrock means water moves in two directions. Sinkholes and sinking streams carry runoff underground where limestone sits close below. On flatter upland ground, a dense subsoil layer holds water after rain instead.

Both cases point to the same fix: a drainage layer of washed stone under or beside the work, and a compacted base above it. Plan the stone before you plan the pour. Frost stays shallow here and footings sit at least 12 inches below grade, so frost is rarely the problem. Water is.

On the steeper, dissected ground, storm runoff cuts into cleared hillsides and road ditches, and creek banks scour after heavy rain. RipRap and coarse stone on those edges cost less than repairing them twice.

Delivery to Burns and the Surrounding Area

We deliver bulk material across Burns and the rest of Dickson County, including Dickson, White Bluff, Charlotte, Vanleer and Cumberland Furnace. Order online and choose your quantity by the ton or by the yard.

Give us a clear drop point and room for a truck to turn around. Bulk loads go where the truck can reach, so a driveway that is already soft in wet weather may need to be built up first.

Lead time depends on the material and the week, so order ahead when a crew is waiting on stone. Fall and spring book up fastest.

Order Bulk Stone and Gravel in Burns

Tennessee Rock Supply delivers crusher run, washed stone, sand, soil and mulch across Burns and Dickson County. Pick the material for the job, then size the quantity with the calculator. Order online when you are ready.